For many people, the first gray hairs show up at the temples, and they're also the last to take color. You color your roots, everything looks even, and two strips of silver still shine through at the sides. Here's why temples are so stubborn and how to cover them at home.
Why gray temples resist color
- The hair is often the most gray. Temples tend to have a higher share of fully white hairs, so there's no natural pigment underneath to help the color look full.
- The hair can be coarser and smoother on the surface. A tight outer layer (cuticle) makes it harder for color to get in.
- They get less product and less time. If you start at the crown and finish at the sides, temples end up with a thinner layer of color and a shorter development time.
- They're short and fine at the hairline. Baby hairs at the front are easy to miss.
Before you start
- Do a patch test 24 hours before every use. See our patch test guide.
- Start with clean, dry hair with no oil, serum or heavy conditioner near the hairline.
- Protect your skin. A thin layer of petroleum jelly along the hairline and around the ears stops staining. Keep it off the hair itself, or the color won't take there.
Step by step: covering gray temples
- Apply to the temples first. Put on gloves and start at the sides before anywhere else, so they get the longest time.
- Use enough product. Work a generous amount into the temple hair until it's fully saturated, not just damp with color.
- Work it in with your fingertips in small circles so every short hair at the hairline gets coated.
- Then do the rest of the roots, finishing at the crown.
- Use the full time on the label. With Polar Instant Dye Shampoo that's about 10 minutes. Don't rinse early, and don't leave it on longer than the label says.
- Rinse well and check the temples in daylight once your hair is dry.
Temples still showing gray?
- Repeat at your next touch-up rather than re-coloring the same day. Coverage often builds up over two applications.
- Check your shade. If you chose a very light shade, a step darker can help on very white temples. If you're unsure, our shade guide walks you through it.
- Look at product build-up. Styling products and silicone-heavy conditioners near the hairline can block color. Wash with a clarifying shampoo the day before you color.
- Consider leaving a little silver. A soft blend at the temples often looks more natural than a solid block of color, especially for men. See gray hair coverage for men.
Quick temple touch-ups between colors
Temples are usually the first place regrowth shows. A quick touch-up on just the temples and part line can stretch the time between full root colors. Do a patch test first every time, and see how long hair dye lasts on gray hair for more tips.
Want a quick, low-mess way to color temples and roots? See Polar Instant Dye Shampoo in 5 shades.
More guides
- How to cover gray roots at home, step by step
- How to patch test hair dye (before every use)
- How to choose the right shade for gray hair
- Semi-permanent vs permanent hair color for gray hair
- Shampoo hair dye vs box dye
- How long does hair dye last on gray hair?
- How to dye your beard at home
- Gray hair coverage for men: look natural, not dyed
- How to remove hair dye stains from skin
- Christmas gifts for someone going gray (under $60)
General information only. Results vary by hair type, starting color and the amount of gray.